chris65

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 14 November 2020 at 18 h 15 min in reply to: ROWE AMI WALL BOX WRD-200 #47930
    chris65
    Participant

    OK Randy, thanks, I connected an 24 AC power as your mentionned and the wallbox is running.

    Now I just have to analyse the signal on Data line and clock line to see when I do a disk selection ,Power on if it is compatible with wallbox2MP3, I will ask Gaelle.

    14 November 2020 at 15 h 57 min in reply to: ROWE AMI WALL BOX WRD-200 #47922
    chris65
    Participant

    Hi Randy

    thanks , I will look for on ebay site.

    See attached the picture of the connector for the wallbox.

    Regards.

    Christophe

    14 November 2020 at 15 h 57 min in reply to: ROWE AMI WALL BOX WRD-200 #47923
    chris65
    Participant

    connectorOk ,thank, I found the schematic on US Ebay.

    See the connector picture.

    Regards.

    Christophe.

    13 November 2020 at 21 h 46 min in reply to: ROWE AMI WALL BOX WRD-200 #47917
    chris65
    Participant

    Hello Scudie

    thanks for these informations, The WRD is an solid state. I will ask Gaelle to know for interfacing with Wallbox2MP3.

    For know , I just need some schematic to understand how I can connect the power supply, to put power ON first.

    I was looking on internet , and I don’t find any manual to buy on WRD 200

    Regards

    Christophe.

    4 September 2020 at 8 h 44 min in reply to: Volume Rockola 507 tri vue wallbox2mp3 v1.5 #47729
    chris65
    Participant

    Dear Scudie

    I don’t have anythings plugged in the audio jack.

    I tried every combination of dip switch and the result is the same with the both pots, the sound volume is the same.

     

    Regards Christophe.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)