Wiring for SCH1 and WALLBOX2MP3

Home › Forums › General discussions › Wiring for SCH1 and WALLBOX2MP3

Tagged: 

Viewing 1 reply thread
  • Author
    Posts
    • 19 August 2020 at 3 h 25 min #47679
      giinostef
      Participant

      I have V1.5 and after some delay I was able to get to installation in an SCH1. I have it all wired except for the signal input to the WB2MP3. It seems to say the two lines going to the signal input are the Blue signal line from the wall box and the 24VAC line??? Shouldn’t that be COM? Standing by for some help for the newbie. Thanks all -!!

       

      • This topic was modified 4 years, 1 month ago by Klaatu.
    • 19 August 2020 at 18 h 08 min #47680
      Randy
      Participant

      The 24v terminal labeled WHT in the SCH1 goes to the input labeled 24v on the emulator and the terminal labeled BLU on the SCH1 goes to the input labeled SIG on the emulator.  There is no COM connection from the SCH1 to the V1.5 emulator.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.