Rockola 507 probleme lecture

Home › Forums › Wallbox2mp3 installation › Rockola 507 probleme lecture

Viewing 15 reply threads
  • Author
    Posts
    • 26 September 2020 at 16 h 51 min #47777
      rock62
      Participant

      Bonjour

      je me permets de me connecter au forum car je viens d acheter un systeme wallbox2mp3

      Je l ai branché en suivant les conseils sur les tuto mais je rencontre un soucis

      J appuie sur une selection ex 100 , la selection mécanique de la wallbox se passe normalement mais pas de musique en final

      Je refais la meme selection , et au deuxieme digit c’est à dire 0, le son de la 1 iere selection apparait et a la fin de la selection mecanique , le son s arrete

      Auriez vous une idée pourquoi le son s arrete en fin de selection mecanique, svp

      merci

    • 26 September 2020 at 17 h 04 min #47784
      Klaatu
      Keymaster

      Etes-vous certains que la consolette fonctionne parfaitement ?
      Vous avez bien nettoyé tous les contacts ?

    • 26 September 2020 at 17 h 22 min #47788
      rock62
      Participant

      Bonjour

      Oui elle etait branchée sur un juke auparavant

    • 26 September 2020 at 17 h 46 min #47789
      Klaatu
      Keymaster

      “Auparavant”, oui mais cela n’indique pas un nettoyage des contacts, c’est un point très sensible.
      Je ne connais pas les 507, mais n’est-ce pas une question de “mute” via un relais ?
      Regardez sur le forum, il y a eu des sujets sur la 507, peut-être des suggestions à trouver.

    • 26 September 2020 at 18 h 14 min #47791
      rock62
      Participant

      Oui je pense au mute, je vais regarder  quel contact participe au mute

      Je n ai rien vu dans les discussions , peut etre devrais je l ecrire en anglais

      Merci

    • 26 September 2020 at 23 h 39 min #47793
      Michiel
      Participant

      Good evening,

      Did you check the position of the jumper on the 3th digitboard?(see picture, 100 vs 160 selections)

      Michiel3th digit board rock ola 507

       

       

    • 26 September 2020 at 23 h 52 min #47794
      rock62
      Participant

      Good evening

      Let me check on tomorrow

      Thanks for the support

       

    • 27 September 2020 at 10 h 58 min #47797
      Scudie
      Participant

      Hi rock62

      I have no personal experience with the 507 but after reading your posts I had a bit of a look at the 507 manual, I think it was on page 8 that it states that there would have been a wire from the Jukebox that connected to the connection strip & is to operate the audio control relay .

      Perhaps this relay needs to be triggered for audio to be operational?

      Cheers Scudie

    • 27 September 2020 at 17 h 35 min #47803
      rock62
      Participant

      Hello Michiel

      I have checked the connection and it is on 160 selection

      Hello Scudie

      On the 507 manuel,  I don t see the point about connection strip

      Could you put a screenshot of it, please

      Thank you for your support

    • 27 September 2020 at 18 h 47 min #47804
      rock62
      Participant

      I tried on a second wallbox and I have the same issue

    • 27 September 2020 at 19 h 03 min #47805
      rock62
      Participant

      Scudie

      I saw in page 8 your comment, it could be an idea but how ?

      I follow the manual recommendation for 507 and there is no connection

      But on assembly manual of wallbox2mp3, there is on the picture for connection 507 , one point is put to groud com (black wire)

       

    • 27 September 2020 at 19 h 17 min #47806
      rock62
      Participant

      I did connection and it is working now

      Thank you Scudie for your idea

      I have one other question

      If i want to put external speaker, can I add it with rockola speaker ?

      Or do i have to do specific connection ?

      Thank you

       

    • 27 September 2020 at 19 h 21 min #47807
      Scudie
      Participant

      Hi Rock62

      I guess you have several options to try once you have identified the audio control relay, if possible you could manually close the contacts of the relay & secure them so they remain closed or identify which of the conections on the relay are switched when the relay is energised remove the relay and connect the identified connections with a simple bridging wire thus negating the requirement for a relay.

      Or as you say you could add the nesseccary ground or live whichever is required to operate the relay.

      Good Luck

      Scudie

    • 27 September 2020 at 19 h 31 min #47808
      Scudie
      Participant

      Hi Rock 62

      I guess it depends on the wattage and resistance of the speakers you are intending of using. Are you intending the external speaker / speakers to be of the wired type?

      I seem to remember that the amp on the V1.5 could handle a pair of 8ohm speakers, so does that mean that you could use 4 x 4 ohm speakers I am unsure (and not an electrician) I guess that Fabien might be the man to ask.

      Cheers Scudie

    • 27 September 2020 at 20 h 37 min #47809
      rock62
      Participant

      Ok ok, thank you, I hope that could answer to this question

    • 30 September 2020 at 12 h 12 min #47823
      gaelle
      Keymaster

      hello all 🙂

      you can put 4 speakers of 4 ohms or 2 of 8 ohms or 1 od 16 ohms in parallel

       

  • Author
    Posts
Viewing 15 reply threads
  • You must be logged in to reply to this topic.